 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
DRA-F101
$510.00
The DRA-F101 receiver has a space-saving depth of just 9.8 inches and luxurious aluminum front panel. The system inherits the high-quality engineering found in our high-end amps, including discrete amplifier outputs for clear stereo separation, a large transformer for robust yet stable power, a high-capacity heat sink, and parts strictly selected for their contribution to sound quality.
The DRA-F101 provides a host of additional performance and convenience features, tone controls (bass, treble, loudness), dimmable display brightness (4 stages), auto function change (for one-touch switching from one sound source to another), a sleep timer (to automatically turn off the system in 10-minute increments up to 60 minutes), and an everyday timer (to automatically turn on/off the system at the same time each day).
|
|
 |
|
|
DRA-F101
$510
The DRA-F101 receiver has a space-saving depth of just 9.8 inches and luxurious aluminum front panel. The system inherits the high-quality engineering found in our high-end amps, including discrete amplifier outputs for clear stereo separation, a large transformer for robust yet stable power, a high-capacity heat sink, and parts strictly selected for their contribution to sound quality.
The DRA-F101 provides a host of additional performance and convenience features, tone controls (bass, treble, loudness), dimmable display brightness (4 stages), auto function change (for one-touch switching from one sound source to another), a sleep timer (to automatically turn off the system in 10-minute increments up to 60 minutes), and an everyday timer (to automatically turn on/off the system at the same time each day).
Disclaimer: Denon does not guarantee a response from the dealer you are attempting to contact. For immediate response to your questions we recommend contacting the dealer via phone.
|
|
|
|
10-Channel Equal Power
10-Channel Equal Power is a feature in Denon’s high-end receiver. These fully configurable amplifiers provide the following options:
o Dual 5.1 Discrete Zone (including DVD-A/SACD)
o 5.1 Main Zone with all channels Bi-Amplified
o 5.1 Main Zone, Zones 2 and 3 Stereo, Zone 4 Mono
o 6.1 Main Zone, Zones 2 and 3 Stereo
o 7.1 Main Zone, Zone 2 Stereo, Zone 3 Mono
o 7.1 Main Zone, Front L/C/R Bi-Amplified
o 9.1 Main Zone, Zone 2 Mono
|
|
|
24-bit/192-kHz D/A (digital-to-analog) Converters
These high speed, high accuracy digital-to-analog converters extract all the information contained in today’s high density digital sources. They convert 192,000 24-bit digital words per second into analog signals to extract the highest definition audio sound. They are fully capable of converting any signal from a DVD-Audio disc as well as providing superior reproduction from conventional CD, CD-R/CD-RW discs. Today’s converters also provide exceptional dynamic range and are largely free of “clock jitter,” a time-based inaccuracy that plagued earlier D/A converters.
|
|
|
5.1-, 6.1-, 7.1-Channels
A surround processor, or receiver, may produce 6, 7, or 8 channels of output, depending on the source and type of surround processing. The basic surround format (“5.1” surround) includes three full-range front channels (left, right and center), two full-range surround channels (left surround and right surround), and a low-frequency, or subwoofer channel. Because the subwoofer channel carries only the lowest octaves compared to the five full-range speakers, it is called the “.1” channel. A “6.1-channel setup” adds a separate full-range “center back” speaker to the 5.1 array. A “7.1”-channel system includes two “back” channels in addition to the surround channels.
|
|
|
6-Channel Equal Power
6-Channel Equal Power connects 6 speakers independently without requiring separate power amps for the pre-outs. It complements Dolby Digital EX and dts ES sound modes, allowing you to connect the 'surround back' speaker straight off the main amplifier without adding a power amplifier to support 6.1 surround formats. With built-in separate internal amplifiers to power each channel independently, this feature allows you to enjoy the same high power output capability per channel, giving a balanced and truly high-impact surround-sound environment.
|
|
|
7-Channel Equal Power
7-Channel Equal Power is a feature used in various Denon amplifiers to connect 7 speakers independently so that separate power amps connected via pre-outs are not required. It allows you to connect the second 'surround back' speaker to complement the surround back speaker for 6.1, straight off the main amplifier without adding a power amplifier to support 7.1 surround formats. Amplifiers with 7-Channel Equal Power have built-in separate internal amplifiers to power each channel independently, thus allowing you to enjoy the same high power output capability per channel, giving a balanced and truly high-impact surround-sound environment.
|
|
|
7-Channel Stereo
Denon's 7-Channel Stereo mode enables top quality normal two channel stereo output from the surround speakers to provide a unique 7 channel stereo option. This mode can be fully utilized from any high quality stereo source via CD, tape, FM-radio or video recorder for dynamic 7-channel output. The 7-channel stereo is available if you have a surround back right speaker connected as well as the surround back left speaker used in 6.1, otherwise you can still experience multi-channel stereo output using a 5-channel-stereo or 6-channel-stereo configuration.
|
|
|
Advanced AL24 Processing
The acclaimed Advanced AL24 DSP processing improves the fidelity of high resolution stereo PCM sources such as CD and DVD (up to 192kHz sampling frequencies). Through sophisticated DSP processing algorithms, it improves low level detail and enhances fidelity by up-sampling and adaptive filtering techniques. Advanced AL24 also provides increased dynamic range and spatial information, bringing out all the nuances with optimum clarity and natural fidelity. For additional information, visit the Denon Tech Showcase.
|
|
|
AL24 Processing
AL24 Processing is a newly developed technology that reduces quantization distortion and represents the ultimate analog waveform reproduction that is designed to support the higher numbers of bits and higher sampling rate of next-generation media. It senses the nature of the digital data being input and interpolates the data so that it faithfully replicates the original analog waveform.
|
|
|
AL24 Processing Plus
Denon has further developed its proprietary AL24 Processing, an analog waveform reproduction technology, to support the 192-kHz sampling frequency of DVD-Audio. This new technology thoroughly suppresses quantization noise with D/A conversion of LPCM signals to reproduce the low-level signals with optimum clarity that brings out all the delicate nuances of the music. For additional information, visit the Denon Tech Showcase.
|
|
|
ALPHA Processing
ALPHA processing is the world's first technical formula for reproducing an analog waveform from the reproduction of 16-bit data in 20-bit quality. The ALPHA processor interpolates the digital data recorded on a CD and reproduces it in a waveform that is very close to the way these musical signals would look in a natural analog waveform.
|
|
|
Audyssey MultEQ XT
The Audyssey MultEQ XT provides advanced room correction and calibration technology. During the Auto Set-Up mode, MultEQ XT automatically determines how many loudspeakers are connected, whether they are connected in phase and whether they are satellites or subwoofers. After processing, it then analyzes and calibrates speaker level, size, and distance. MultEQ XT detects the proper crossover point and determines correct frequency response for up to eight listener positions simultaneously. Denon's implementation of MultEQ XT uses multiple Texas Instruments' Aureus DSP processors with high-end digital-to-analog converters. Both the Room EQ and Auto Set-Up features can be disabled if required. For additional information, visit the Denon Tech Showcase.
|
|
|
Auto Setup
The Auto Set-Up feature eases setup hassles by confirming speaker phase, assessing the sizes of all of your speakers, measuring speaker-to-listener distances, and balancing speaker levels. With the Denon DM-S205 placed in your favorite listening seat, this feature uses a test tone generator and proprietary programming to precisely balance speaker levels and fine-tune the delay settings for each speaker. The result is optimized system performance for your specific home theater room.
|
|
|
Auto Set-Up/Room EQ Adjust
The Auto Set-Up/Room EQ Adjust feature eases setup hassles by confirming speaker phase, assessing the sizes of all of your speakers, measuring speaker-to-listener distances, and balancing speaker levels. With the Denon DM-S205 or DM-S305 calibration-grade microphone (some optional) placed in your favorite listening seat, this feature uses a test tone generator and proprietary programming to precisely balance speaker levels and fine-tune the delay and EQ settings for each speaker. The result is optimized system performance for your specific home theater room.
|
|
|
Cinema Equalizer
The sound from movie sources recorded in Dolby Digital, dts, or other formats emphasizes high-frequency range due to a theater’s front speakers being placed behind the movie screen. If this sound is reproduced in the home theater without correction, the high-frequency range can be too strong. Denon amplifiers feature a Cinema Equalizer to correct these high-frequency components so that the sound is clearer and easier to listen to.
|
|
|
Compact Disc - Digital Video
|
|
|
Compact Disc-Recordable (CD-R)
CD-R is a recordable compact disc that can be written to only once. Once data is “burned” onto the disc, it cannot be altered, erased, or written over.
|
|
|
Compact Disc-Rewritable (CD-RW)
The data on CD-RW discs can be erased, modified, or written over. You will need a CD-RW recorder to burn CD-RW discs. Not all players can read CD-RW discs as they do not reflect a laser beam with the same intensity as do CD and CD-R discs.
|
|
|
Composite Video
Composite Video is a video signal format that transmits both chrominance (color) and luminance (brightness) information on a single 75-ohm cable. A virtually universal format, it provides the minimum quality you should expect from today’s home entertainment components. For the technically-minded, chrominance is carried in a 3.58-MHz sideband and is filtered by the television’s notch or comb filter. Poor filtering can result in “dot crawl,” “hanging dots,” or other image artifacts.
|
|
|
Denon Link
Connected via a shielded twisted pair (STP) RJ-45 fitted cable to a Denon Link-compliant A/V amplifier, the balanced signal transfer offers lower voltage than coaxial or unbalanced cables. Since Denon Link is far less susceptible to radiated noise, it ensures the highest level of signal transfer. The Denon Link interface is able to transfer high grade LPCM 24-bit, 192kHz, 2-channel and 96kHz, 24-bit, multi-channel digital output. Denon Digital Link uses low-voltage differential signaling (LVDS). Transfer capabilities of greater than 1.2 Gbps at a differential voltage of approximately 0.3 Vpp are possible. For additional information, visit the Denon Tech Showcase.
|
|
|
Denon Pixel Image Correction (DPIC)
DPIC is a patented image enhancer algorithm and processing method, which enhances the target pixel by analyzing all the surrounding 8 pixels to produce a more natural image. It detects and processes images with vertical, horizontal and also diagonal direction at pixel level. The Luminance(Y) and Chrominance difference (Cr, Cb) signals are processed with the DPIC algorithm. The result of running this process on the signals and the corresponding pixels is a more natural image.
|
|
|
Digital Light Processing (DLP)
DLP is a method of displaying images developed by Texas Instruments. DLP projects video images by reflecting a light source off an array of tens of thousands of microscopic mirrors. Each mirror represents one pixel and reflects light toward the lens for white and away from it for black, modulating in between for various shades of gray. Three-chip versions use separate arrays for the red, green, and blue colors. Single-chip arrays use a color-filter wheel that alternates each filter color in front of the mirror array at appropriate intervals.
|
|
|
Directional Correlation De-interlacing (DCDi)
DCDi is a specialized video processing developed by Faroudja that involves advanced algorithms to remove the jagged edges that appear when standard interlaced video is viewed on progressive scan displays. DCDi converts standard interlaced signals into progressive scan signals in order to eliminate the stair casing effect that conventional up-converters can introduce to diagonal edges.
|
|
|
DivX Video-Playback
DivX is an advanced digital media format that lets you play, create and share digital video by turning large video files into much more streamlined files. The DivX codec (short for compressor/decompressor) compresses the video to a convenient size without losing any noticeable quality and play those videos back on almost any device. For example, the DivX codec can compress an MPEG-2/DVD file to nearly one-tenth its original size.
|
|
|
Dolby Digital
Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digital consists of up to “5.1” channels – front left, front right, center, surround left, surround right, and an additional channel exclusively reserved for additional deep bass sound effects. Dolby Digital’s main channels can all contain full range sound information, from the lowest bass, up to the highest frequencies – 22 kHz. The signals within each channel are distinct from the others, allowing pinpoint sound imaging and tremendous dynamic range from the most powerful sound effects to the quietest, softest sounds, free from noise and distortion.
|
|
|
Dolby Digital EX
In a movie theater, film soundtracks that have been encoded with Dolby Digital surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program. This channel, called Surround Back, places sounds behind the listener in addition to the currently available front left, front center, front right, surround right, surround left and subwoofer channels. The additional channel provides the opportunity for more detailed imaging behind the listener and brings more depth, spacious ambience and sound localization then ever before.
|
|
|
Dolby Headphones
In conventional headphones, sound is directed into the listener’s ears from two sides in order to preserve the stereo effects from the speakers. The Dolby Headphone, however, generates signals that more closely emulate surround sound from the speakers to give you a more realistic multi-channel sound effect through your headphones. It supports Dolby Pro Logic, Pro Logic II, and Dolby Digital as well as stereo and multi-channel signals. Dolby Headphone reproduces the sonic experience you receive through your speakers from stereo or multi-channel sources. It provides three distinct modes:
o DH1: Referred to as Dolby Headphone “Reference Room,” this mode recreates a small, acoustically “dry” room, well-suited to both music and movie programs.
o DH2: This mode has an acoustically softer effect than DH1, and is best suited for music recordings.
o DH3: This mode gives a greater sense of distance and sonic dispersion to create a large room such as a concert hall or movie theatre.
|
|
|
Dolby Noise Reduction
The Dolby noise reduction system substantially reduces the tape background noise (hiss) inherent in the cassette medium. Tape background noise consists primarily of high frequency information, which is particularly annoying during soft passages. The Dolby NR system increases the level of low volume mid and high-frequency signals during recording and reduces the level of these signals by an identical amount during playback. As a result, the playback signal is identical to the original source, but the level of background noise generated by the tape is greatly reduced.
|
|
|
Dolby Pro Logic II
Dolby Pro Logic II is a new multi-channel playback format developed by Dolby Laboratories using feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve surround sound. Dolby Pro Logic II offers a wider band range (20 Hz to 20 kHz or greater) and the surround channels are played as stereo signals. Various parameters can be set according to the type of source and the contents, so it is possible to achieve optimum decoding.
|
|
|
Dolby Pro Logic IIx
Dolby Pro Logic IIx furthers the matrix decoding technology of Dolby Pro Logic II to decode audio signals recorded on two channels up to 7.1 playback channels, including the surround back channel. Dolby Pro Logic IIx also allows 5.1-channel sources to be played in up to 7.1 channels. The mode can be selected according to the source – Music mode is best suited for playing music, Cinema mode for playing movies, and Game mode for playing games.
|
|
|
Dolby Virtual Speaker
Dolby Virtual Speaker technology simulates a highly realistic 5.1-speaker surround sound listening environment from two speakers. It also creates a wider two-channel environment during playback of stereo CDs and MP3s, and when combined with Dolby Pro Logic II processing, delivers a virtual surround listening experience from any high-quality stereo source. More than a simple "expanded stereo" performance, Dolby Virtual Speaker incorporates highly advanced algorithms and extensive room-modeling technologies to reproduce the sonic spectrum and dynamics of a properly placed 5.1-speaker system in a room.
|
|
|
dts 96/24
dts 96/24 allows high-quality 5.1 channel sound playback with full-quality, full-motion video. dts 96/24 allows both digital audio output and video output from your existing DVD player and is backward compatible with existing dts decoders for normal dts 5.1 playback. dts 96/24 exceeds the resolution of most film soundtrack masters to date, and will initially apply mainly to high quality dts music DVD discs.
|
|
|
dts Digital Surround
dts Digital Surround (also called simply dts) is a multi-channel digital signal format developed by Digital Theater Systems. dts is a 5.1-channel surround sound format that is available in movie theaters, and as an optional soundtrack on some DVD-Video movies for home theater viewing. The primary advantage of dts is that it offers higher data rates, leading many home theater enthusiasts to claim the sound quality for movie or music audio tracks to be closer to the original master recordings.
|
|
|
dts Neo:6 Cinema
This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB) channels.
|
|
|
dts Neo:6 Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field.
|
|
|
dts Neo:6 surround
This mode applies conventional 2-channel signals to the high precision digital matrix decoder used for dts-ES Matrix 6.1 to achieve 6.1-channel surround playback. High precision input signal detection and matrix processing enable full band reproduction (frequency response of 20 Hz to 20 kHz or greater) for all 6.1 channels, and separation between the different channels is improved to the same level as that of a digital discrete system. dts Neo:6 surround includes two modes for selecting the optimum decoding for the signal source – dts Neo:6 Cinema and dts Neo:6 Music
|
|
|
dts-ES Discrete 6.1
dts-ES Discrete 6.1 is one of the newest recording formats, with all 6.1 channels (including the SB channel) recorded independently using a digital discrete system. Since each of the surround channels are fully independent, the sound can be designed with total freedom to achieve a sense that the acoustic images are moving about freely among the background sounds surrounding the listener from 360 degrees. Though maximum performance is achieved when sound tracks recorded with this system are played using a dts-ES decoder, when played with a conventional dts decoder the SB channel signals are automatically down-mixed to the SL and SR channels, so none of the signal components are lost.
|
|
|
dts-ES Extended Surround
dts-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems. Used professionally in movie theaters since 1999, dts-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals. In addition to the 5.1 surround channels, dts-ES Extended Surround also offers Surround Back, sometimes also referred to as “surround center” channel for surround playback with a total of 6.1 channels. dts-ES Extended Surround includes two signal formats with different surround signal recording methods, dts-ES Discrete 6.1 and dts-ES™ Matrix 6.1.
|
|
|
dts-ES Matrix 6.1
With this format, the additional SB channel signals undergo matrix encoding and are input to the SL and SR channels beforehand. Upon playback they are decoded to the SL, SR and SB channels. The performance of the encoder used at the time of recording can be fully matched using a high precision digital matrix decoder developed by dts, thereby achieving surround sound more faithful to the producer’s sound design aims. In addition, the bit stream format is 100% compatible with conventional dts signals, so the effect of the Matrix 6.1 format can be achieved even with 5.1-channel signal sources.
|
|
|
Dual Discrete Video Circuit (D.D.V.C.)
Not only does Denon separate audio and video circuitry in its DVD players to maintain high sound and picture quality, the interlaced, progressive and SCART video output circuits are also arranged independently of each other. Isolated circuits and boards, the use of a box chassis and even the encoder chips (in high end models) are all exclusively dedicated to individual tasks to minimize mutual interference and ensure optimum picture quality.
|
|
|
DVD-Audio (DVD-A)
DVD-A is the audio version of a DVD. It uses an extended version of PCM technology and provides high frequency response to 96 kHz (slightly less than SACD) and a 144 dB dynamic range (greater than SACD). Conventional DVD players will not play the high definition data contained on a DVD-A disc.
|
|
|
DVD-Audio/Video
Playback of media from standard "DVD Video" & "DVD-Audio" disc's.
|
|
|
DVDO
DVDO is a high precision 10-bit professional scaler that executes the optimum conversion to suit the output of the independent HDMI and DVI transmitters and provides Color Space Conversion for RGB signals. Parallel Video Outputs (Digital and Analog) are included such that both HDMI and DVI-D can output the selected scaling rate simultaneously with 480p/576p via a component. Developed by Anchor Bay Technology (ABT), it has an excellent reputation for high quality video technology.
|
|
|
DVI (Digital Video Interface)
DVI specifies ways to get analog and/or digital video signals to a monitor with a single connector. DVI comes in three flavors: DVI-A for analog signals; DVI-D for digital signals, and DVI-I (or Integrated) for both analog and digital signals. Using a DVI connection, a digital signal sent to an analog display device is converted into an analog signal. If the display can receive a digital signal (e.g., flat panel displays), no digital-to-analog conversion is necessary.
|
|
|
DVI-D Output (HDCP)
Digital Voice Integrated (DVI-D) is used for direct digital connections between source video (Denon DVD players) and digital LCD, plasma and LCD projectors. This provides a faster, higher-quality image than with analog, due to the nature of the digital format. Outputting this signal to a display eliminates any loss of quality due to conversion.
|
|
|
Dynamic Discrete Surround Circuit (D.D.S.C.-Digital-Circuit)
D.D.S.C.-Digital-Circuit is used for high-quality Sound Reproduction. It is a circuit configuration specially designed by Denon in which all elements of the surround processor are optimized through the use of selected high-performance discrete components, including separate A/D and D/A converters, with sophisticated DSP surround decoding. For additional information, visit the Denon Tech Showcase.
|
|
|
EL-Touch-Panel Remote Control
This remote control utilizes an electroluminescent display, similar to the technology employed by LCD backlights. On this Denon remote, the luminous blue color of the buttons is the backlight being allowed through the insulating surface that covers the remote’s functions. Each function, or button, has its own parent EL area and is configured to allow different buttons to become lit when certain modes are engaged.
|
|
|
GLO-KEY Technology
The keys on the remote control are made of florescent glow in the dark material to allow for easy use in dark rooms. On the remotes for the Denon amplifiers and DVD players, the important keys have been highlighted with the GLO-Key technology. Some of the remotes have also a backlight that illuminates the keys on touch of the remote.
|
|
|
HD Radio-Ready
HD Radio-Ready
|
|
|
HDCD (High Definition Compatible Digital)
HDCD is an encoding/decoding technology that encodes with 20 bits of real musical information, as compared with 16 bits for all other CDs, greatly reducing the distortion that occurs upon digital recording, while maintaining compatibility with conventional CD formats. HDCD overcomes the limitation of the 16-bit CD format by using a sophisticated system to encode the additional 4 bits onto the CD while remaining completely compatible with the existing CD format. HDCD provides more dynamic range, a more focused three-dimensional soundstage, and extremely natural vocal and musical timbre to achieve the highest resolution. With HDCD, you get the body, depth, and emotion of the original performance not a flat, digital imitation
|
|
|
High Current (HC) Transistors
The highly responsive HC transistor doubles the capacity of conventional transistors to faithfully reproduce even the most dramatic transitions between high and low-level signals with negligible sound distortion. The improvement in musical expression is audibly noticeable.
|
|
|
Hollywood Quality Video
HQV is a new benchmark standard of video excellence created through a partnership between Silicon Optix and Teranex. HQV represents the integration Teranex‘s broadcasting platform and software algorithms – refined over 100,000 hours of content verification for the industry’s highest level of quality – into Silicon Optix’ Realta chip – the industry’s first fully software programmable video array processor capable of performing over 1 trillion operations per second, with an Image Fidelity Enhancement Engine and end-to-end true 10-bit image processing. These core technologies combine together to enable the simultaneous processing of dual high-definition image streams for home entertainment and professional video display products. Denon DVD players are the world’s firsts to incorporate this innovative HQV technology.
|
|
|
IEEE 1394
Also known as FireWire, IEEE 1394 is a standard for high-speed serial connections approved by the Institute of Electrical and Electronic Engineers. The standard is designed for the exchange of information between PCs and consumer electronics devices that transfer large amounts of data, such as digital camcorders or VCRs.
|
|
|
JPEG
This digital picture format was developed by the Joint Photographic Experts Group. JPEG files are compressed at varying degrees, but they still render detail and color better than competing file formats, like GIF files. JPEG files are smaller and thus download more quickly.
|
|
|
Kodak Picture CD-compatible
DVD players that have the Kodak picture CD compatible logo, have been tested and certified by Kodak to ensure that an enjoyable viewing experience is provided. You can view your picture CD on these DVD players.
|
|
|
Lip Sync Circuitry
Lip sync circuitry ensures that audio and video remain visibly in step during DVD playback. It is particularly important when you are watching video with “fixed pixel” technology found in today’s plasma, LCD, or DLP devices that often require extensive “scaling” to match the source and the screen. Lip Sync lets you synchronize audio and video so that sound reaches your ears when your eyes say it should.
|
|
|
MLP-Decoding
Meridian Lossless Packing (MLP) is an audio coding format that enables the highest possible sound quality and integrity in delivery or storage of high-quality audio. MLP has been adopted as the mandatory coding system to deliver the highest quality sound on DVD-Audio and other formats.
|
|
|
MP3 (MPEG 1, Audio Layer 3)
MP3 is considered one of the most popular codec (encoder/decoder) for storing and transferring music. Though it employs a "lossy" compression system that removes signal components judged to be inaudible, MP3 still manages to deliver reasonable sound quality in files that are 80 to 90% smaller than comparable uncompressed WAV files. You can select varying amounts of compression when creating MP3 files.
|
|
|
Multi-Room Entertainment System
Denon’s Multi Source function lets you select different audio sources for listening. Different sources can thus be enjoyed in the main room (MAIN) and sub-room(s) – ZONE 2 and ZONE 3 – simultaneously. For additional information, visit Denon’s Tech Showcase.
|
|
|
Noise Shaped Video (NSV)
The NSV precision video feature works in the digital domain to reduce noise in the video signal frequency band in order to enhance video signal linearity, provide the most accurate signal representation, and enhance the picture quality. Noise shaping techniques can be combined with dynamic element matching techniques in order to reduce the matching requirements of DAC elements by converting the analog mismatch into out of band noise. This approach of dynamic element matching and noise shaping has been shown to allow the use of sigma delta modula | | | |
